Products

The IC Card Smart Prepaid Water Meter is a modern intelligent water meter that combines mechanical and electronic counting. It mainly consists of an IC card reader/writer, a low-power...

Specification 1. Type name: Woltmann Type Water Meter 2. Size: DN50-DN500 3. Standard :ISO 4064 Class B 4. Material: Cast iron 5. PN : 1.0/1.6 Mpa (10/16bar) 6. Horizontal installation...

Specification 1. Type name: Volumetric Piston Type 2. Size.: DN15 to 20mm( 1/2" -3/4"), Available for cold water(40°C) 3. Standard :ISO 4064, Class C standard 4. Material: Brass 5. Easy for...

The water enters the meter from the inlet of the meter body and impacts the vane wheel at the tip of the vane blades to make it rotate. The rotation of the vane wheel (proportional to the velocity...

Specification 1. Type name: Multi-jet ,wet-dial ,rotary vane wheel type 2. Model No.: LXS-15EP 3. Standard :ISO 4064 Class B 4. Material: ABS 5. Liquid sealed register 6. Horizontal...

The Plate Flange is a kind of the flange, which weld with the end of the pipe through inserting the pipe into the hole. The sealing surface of plate flange is flat face. The cost is very low, it...

Threaded Flanges is used for special circumstances with their main advantage being that they can be attached to the pipe without welding. Sometimes a seal weld is also used in conjunction with the...

Socket weld flange simplified as SW flange, it has a recessed area (like a shoulder) in the flange bore, this shoulder serves as a guide to set the depth of the pipe that inserted to the flange....

Blind flange is like a flange cover, also called blind disk or flanged pipe plug. Blind flange has no holes in the center, for to seal the pipe opening. So it's function is the same as the...

Slip on pipe flanges are joined, generally both outside and inside, to offer potency and stop leakage. Slip on pipe flanges can at times as well have a ring/boss or a focal point, and can be made...

Weld Neck Flange is flanges that designed to be joined to a piping system by butt welding. This kind of flange include lots of specification. Weld Neck Flange is expensive because of its long...

Rubber expansion joint is a flexible connector fabricated of natural and/or synthetic elastomers and fabric, if necessary,internal metallic reinforcements designed to provide stress relief in...