Home > News > Content

Manufacturing Requirements for T-type Ductile Iron Pipe Fittings

Feb 06, 2023

1. The chemical composition of nodular cast iron pipe fittings shall be strictly required. The carbon and silicon content of the original molten iron shall be higher than that of gray cast iron, and the content of manganese, phosphorus and sulfur in nodular cast iron shall be reduced.

2. The tapping temperature of molten iron is higher than that of gray cast iron to compensate for the loss of molten iron temperature during spheroidization and inoculation.

3. Spheroidizing treatment is carried out for ductile iron pipe fittings, that is, adding spheroidizing agent to molten iron.

4. Adding inoculant for inoculation.

5. Ductile iron has poor fluidity and large shrinkage. Therefore, higher pouring temperature and larger pouring system size are required. Risers and chills shall be reasonably applied and the principle of sequential solidification shall be adopted.

6. Proper heat treatment shall be conducted for ductile iron pipe fittings.

Send Inquiry