Valves are pipeline accessories used to open and close pipelines, control flow, adjust and control the parameters (temperature, pressure and flow) of the conveying medium. According to its function, it can be divided into shut-off valve, check valve, regulating valve and so on.
Classification:
By function and purpose
(1) Shut-off valve
This type of valve is used for opening and closing. It is standing on the inlet and outlet of cold and heat sources, equipment inlet and outlet, pipeline branch line (including standpipe), and can also be used as a water discharge valve and a gas release valve. Common shut-off valves include gate valves, globe valves, ball valves and butterfly valves.
(2) Check valve
This kind of valve is used to prevent the medium from flowing back, using the kinetic energy of the fluid itself to open by itself, and automatically close when it flows in the reverse direction. Standing at the outlet of the water pump, the outlet of the steam trap, and other places where the reverse flow of fluid is not allowed. There are three types of check valves: swing type, lift type and wafer type.
(3) Regulating valve
The pressure difference between the front and rear of the valve is constant. When the opening of the ordinary valve changes within a relatively large range, the flow rate does not change much, and when the opening degree is reached, the flow rate changes sharply, that is, the regulation performance is poor. The regulating valve can change the valve spool stroke according to the direction and size of the signal to change the resistance of the valve, so as to achieve the purpose of regulating the flow of the valve. The regulating valve is divided into manual regulating valve and automatic regulating valve.
(4) Vacuum
Vacuum category includes vacuum ball valve, vacuum baffle valve, vacuum charging valve, pneumatic vacuum valve, etc. Its function is to change the direction of air flow, adjust the size of air flow, and cut off or connect the pipeline in the vacuum system. The vacuum system components are called vacuum valves.
(5) Special purpose
Special purpose categories include pigging valves, vent valves, drain valves, exhaust valves, filters, etc.
The exhaust valve is an indispensable auxiliary component in the pipeline system, which is widely used in boilers, air conditioners, oil and gas, and water supply and drainage pipelines.











