Tianyi Suns Pipe&Fittings Co., Ltd. is one of the most reliable manufacturers and suppliers of di dismantling joint in China. We have world-leading production equipment and strong manufacturing capabilities. Please rest assured to buy durable di dismantling joint for sale here from our factory. Quality products and reasonable price are available.
DI Dismantling Joint consists of the main body, the sealing ring, the gland, the telescopic short pipe and other main parts. It is a new product that connects pumps, valves and other equipment with pipelines. It connects them into a whole through full bolts, and has a certain displacement. In this way, it can be adjusted according to the installation size on site during installation and maintenance, and the axial thrust can be transferred back to the whole pipeline during work. This not only improves work efficiency, but also plays a certain protective role for pumps, valves and other equipment.
Advantages of DI Dismantling Joint
1.Installation is simple and convenient, convenient valve installation.
2.Rubber is strong in compression and elasticity.
3.Metal and sealing rings are highly stringent.
4.In the pipeline, it can effectively compensate and ease the pipe and blind plate thrust.
|
Size |
DN40-DN2000 |
|
Standard |
ISO2531/EN545 |
|
Working pressure |
PN10/PN16/PN25/PN40 |
|
Bolt &Nut |
Carbon Steel Grade 4.8 with Zinc Coating, Epoxy Coating or Dacromet Coating; Or Stainless Steel upon customers request. |
|
Tie rod |
Carbon Steel Grade 4.8 with Zinc Coating, Epoxy Coating or Dacromet Coating; Or Stainless Steel upon customers request. |
|
Gasket |
For water or Gas : NBR Grade A |
|
Coating |
250 Microns Fusion Bonded Epoxy Coating inside and outside, or bitumen painting upon customers request. |
|
Application |
Construction, water supply and drainage, and heavy industry, refrigeration, sanitation, plumbing, etc |
The dismantling joint is a funny creature in a pipeline system. Most of the time it doesn't do anything core-doesn't control flow, doesn't regulate pressure-but when the day comes to pull a valve, swap a pump, or service a meter, whether the line gets back up fast comes down to whether this thing cooperates. TianyiSuns' ductile iron dismantling joint is built for exactly that "does it hold up when it counts" moment.
Structurally, it's a body, a gasket, a gland, and a telescopic short spool, with the two end flanges tied together by tie rods. That telescopic range in the middle is the whole point. Pipe thermal expansion and contraction, slight foundation settlement, or a pipe that got cut a few millimeters short during installation-the telescopic travel eats all of that, so nobody's out there dragging pipes to line up flanges. Sizes below DN300 typically have around 40mm of adjustment; larger ones vary by model, some up to 125mm. That number looks like nothing on a drawing, but in the trench it's the difference between "it fits" and "go back and re-cut the pipe."
What really sets a dismantling joint apart from an ordinary expansion joint is that set of tie rods. When the valve comes out, the piping system can't fall apart-the axial thrust has to go somewhere. The tie rods lock the two end flanges together, so with the valve or pump removed, the pipes stay put and the thrust still travels through the system internally. Installation order matters a bit: snug up the end flange bolts first, then torque the tie rod nuts to spec, then come back and re-tighten the flange bolts. I've seen jobs where only the flanges got tightened and the tie rods were left loose-during pressure test the joint got pushed open a crack and water squirted out of the tie rod holes.
Material is GGG500 ductile iron, a good step up from grey iron in toughness and tensile strength, and it holds up under backfill and road loads in buried service. Interior and exterior coating is food-grade epoxy powder, fine for potable water lines directly. Gasket selection follows the medium-EPDM for clean water and potable supply, NBR for sewage and oily media. Not a complicated choice, but get it wrong and the rubber swells or ages out, and the dismantling joint becomes a scheduled leak point.
Sizes run DN50 to DN3000, pressure classes PN10 to PN40, flange drilling to EN1092-2. In real projects the regular output clusters between DN100 and DN600; above that, large-diameter moulds turn over slowly and lead times need to be booked ahead. On customization, once the flange standard and pressure class are confirmed, non-standard lengths, special tie rod materials, and extended telescopic travel are all workable.
A dismantling joint's value isn't in the day it's installed-it's in the day a valve has to come out. When choosing, take a closer look at the tie rod material and thread precision; that's more real than saving a few points on price. TianyiSuns' unit is positioned for routine municipal water and wastewater and pump station valve chambers: make the telescopic adjustment smooth, the tie rod locking reliable, and the gasket selection right, and it'll sit quietly in the line until the one time it's needed.
Drawing of DI Dismantling Joint

Details

Package

Hot Tags: di dismantling joint, China di dismantling joint suppliers, manufacturers, Gibault Joint, Joint, Dismantling Joint, DI Dismantling Joint














