DI Socket Fittings with T-type Joint
video
DI Socket Fittings with T-type Joint

DI Socket Fittings with T-type Joint

Ductile iron fittings are so common in water supply and drainage engineering that many people think there's not much to say about them. But the T-type socket joint is exactly the kind of thing that looks simple on the surface and has real craft behind it. TIANYISUNS supplies DI socket fittings with T-type joints...
Send Inquiry
Add To Inquiry
Description

Tianyi Suns Pipe&Fittings Co., Ltd. is one of the most reliable manufacturers and suppliers of di socket fittings with t-type joint in China. We have world-leading production equipment and strong manufacturing capabilities. Please rest assured to buy durable di socket fittings with t-type joint for sale here from our factory. Quality products and reasonable price are available.

 

Ductile iron fittings are so common in water supply and drainage engineering that many people think there's not much to say about them. But the T-type socket joint is exactly the kind of thing that looks simple on the surface and has real craft behind it. TIANYISUNS supplies DI socket fittings with T-type joints covering the standard diameter range from DN50 to DN2600mm, manufactured to EN545, ISO2531, EN598 and other standards, with pressure ratings from PN10 up to PN40.

 

DI Socket Fittings with T-type Joint

 

Material:

Ductile Cast Iron

Standard:

ISO2531, EN545, EN598

Pressure:

PN10, PN16, PN25

Flange drilled:

ISO7005-2,BS4504, EN1092-2, DIN2501

Specification:

DN50 to DN2000, K12/14

Joints type:

Typon joint(push on joint)

Application:

Water supply project, drainage, sewerage, Irrigation ,water pipeline

 

DI Socket Fittings with T-type Joint Coating

 

Coating:

 

Internal

Portland cement mortar lining

Sulphate Resistant cement mortar lining

 

High-Aluminum cement mortar lining

 

Fusion bonded epoxy coating

 

Liquid epoxy painting

 

Black bitumen painting

 

External

Zinc(130g/㎡)+bitumen(70microns) painting

Fusion bonded epoxy coating

 

Zinc-aluminum alloy (400g/㎡)+liquid epoxy painting according to customers' requirements

 

Accessories

Rubber ring (SBR, NBR, EPDM), bolts, nuts and wahsers, restrained glands

Packing

Wooden cases or pallets

 

Ductile iron fittings are so common in water supply and drainage engineering that many people think there's not much to say about them. But the T-type socket joint is exactly the kind of thing that looks simple on the surface and has real craft behind it. TIANYISUNS supplies DI socket fittings with T-type joints covering the standard diameter range from DN50 to DN2600mm, manufactured to EN545, ISO2531, EN598 and other standards, with pressure ratings from PN10 up to PN40. Those specs are the foundation, sure - but what's really worth talking about is what a T-type joint actually means out on site.

 

The most direct selling point of a T-type joint is speed. Push the spigot into the socket, the rubber gasket seats itself, and you're done - no welding, no lining up flange bolt holes, no torque wrench going around tightening bolts one by one. A crew that knows what they're doing can join a section of DN600 pipe in just a few minutes. That's a big part of why so many water network renovation projects around the world go with T-type ductile iron pipe - installation efficiency is a major consideration.

 

But "fast" comes with a precondition. The seal on a T-type joint depends entirely on the rubber gasket sitting correctly in the socket groove. If the gasket isn't seated flat, if it's twisted, or if there's casting sand left in the socket that nobody cleaned out, it'll feel like it's "in place" when you push it home - but the seal is already compromised. The specs are pretty detailed on this step: for DN800 and below, the gasket goes in folded into a heart shape; for DN800 and above, into a plum-blossom shape. After it's in, you run your hand around the entire gasket to make sure it's not tilted or twisted. Sounds fussy, but anyone who's actually done it knows - skip any of those steps, and the pressure test will point it out for you.

 

Material and coating are another dimension. Ductile iron's elongation is what it is, and the T-type joint itself allows a certain amount of angular deflection - put those two together, and the piping system won't just crack outright when it faces foundation settlement or minor displacement. TIANYISUNS fittings come with cement mortar or epoxy lining on the inside, and zinc plus bitumen or FBE epoxy on the outside - which one to use depends on the conveyed medium and burial environment. When selecting, rather than agonizing over "which coating is better," it's more useful to lay out the water quality, soil conditions, and design life clearly, and let the coating match the service conditions - not the other way around.

 

TIANYISUNS has been making ductile iron fittings for years, and the T-type joint product line has consistently been one of our most stable supply categories. The reason isn't complicated: customers want easy installation, a pressure test that passes the first time, and a pipe they bury and never have to think about again. The T-type joint's design logic is aimed squarely at those three things. What we need to do is keep the gasket fit precision and socket/spigot dimensions under control - so that "easy" doesn't turn into "easy to mess up." Get the joint right, and everything after that goes smoothly.

 

Hot Tags: di socket fittings with t-type joint, China di socket fittings with t-type joint suppliers, manufacturers, Ductile Iron Pipe and Fittings, DI Socket Fittings with K type Joint, ductile iron fittings, DI Fittings, ISO2531 Ductile Iron Pipe Fitting, DI Socket Fittings with EX Joint

Send Inquiry

(0/10)

clearall