Tianyi Suns Pipe&Fittings Co., Ltd. is one of the most reliable manufacturers and suppliers of double flanged 90° bend in China. We have world-leading production equipment and strong manufacturing capabilities. Please rest assured to buy durable double flanged 90° bend for sale here from our factory. Quality products and reasonable price are available.
|
Material |
Ductile iron |
|
Standard |
EN545, EN598, ISO2531, ANSI/AWWA, etc |
|
Size |
DN50-DN2600mm |
|
Color |
Blue,Black,Red Ect. |
|
Joint Type |
Flange type |
|
Pressure |
PN10/PN16/PN25/PN40 |
|
OEM |
Acceptable |
|
Fitting Types |
Socket bend, Flanged bend, Socket and Flanged Tee, Flanged socket, Socket taper, blank flanges, as well as Flanged adaptor,coupling, dismantling joints, Fitting for PVC pipes and Other pipeline accessories |
|
Surface treatment |
Fusion bonded epoxy coating |
|
Cement lining inside and zinc and bitumen coating outside |
|
|
Zinc+bitumen inside and outside |
|
|
According to customers' requirements |
|
|
Inspection |
Foundry in-house: Third party inspection available upon request |
|
Application |
Stormwater systems |
|
Advantage |
We can make various high quality ductile iron fittings according to customer's requests. |
|
Package |
Standard wooden pallets or wooden cases |
For many pipeline site teams, 90-degree turning points are where leaks and maintenance headaches most often show up - that's exactly why we at TianyiSuns keep refining our Double Flanged 90° Bend. Unlike socket fittings that rely on rubber gaskets for flexible alignment, this double flanged bend locks in place with standard flange bolts at both ends. It works perfectly for pump rooms, valve chambers and water treatment stations where frequent disassembly and routine inspection are expected. It mates smoothly with valves, flow meters and steel flanged pipes, making it a highly reliable turning solution for pressurized pipeline systems.
The bend is cast as one solid piece from QT450-10 ductile iron, manufactured in full compliance with ISO 2531, EN 545 and EN 598 international standards. Flange drilling follows EN 1092-2. Sizes range from DN80 to DN1600, available for PN10 and PN16 pressure classes. We line the inside with cement mortar and coat the outside with bitumen or epoxy powder. We tailor the coating package based on what you carry - clean drinking water, raw water or sewage - to guard against corrosion from soil and wastewater. Every single unit goes through independent hydrostatic testing before shipment. It's a rule we've stuck to for years, and quite a few overseas EPC clients ask to watch this test step when they visit our factory.
We've seen lots of project engineers pick this bend for water upgrade works in Southeast Asia and irrigation networks across the Middle East. Their reasoning is straightforward: flange connections keep good concentricity, and there's plenty of room for fine adjustment during installation. If you need to swap out equipment or rework the pipeline later, you just loosen the bolts and remove the bend, no need to cut up the adjacent pipe sections. For large diameter turns, our technical team can also review the flow path and tweak the curve profile to cut down turbulence and pressure loss.
We are a ductile iron fitting manufacturer based in Shanxi, China, and we do more than just cast parts to drawings. If your project needs non-standard flange drilling, special coating or base versions for settlement-prone ground, our mold shop can make it happen. For engineering contractors, a good double flanged 90° bend is far more than something that simply turns the pipe at a right angle. Its real value is holding a tight seal for decades, whether buried underground or installed above ground, and cutting down long-term risks for your whole pipeline.
|
NOMIMAL DIAMETER DN |
L |
MASS(Kgs) |
||
|
PN10 |
PN16 | PN25 | ||
|
40 |
140 |
5.2 |
5.2 |
5.2 |
|
50 |
150 |
6.5 |
6.5 |
6.5 |
|
60 |
160 |
7.3 |
7.3 |
7.1 |
|
65 |
165 |
8.2 |
8.2 |
8.0 |
|
80 |
165 |
9.6 |
9.6 |
9.6 |
|
100 |
180 |
11.9 |
11.9 |
12.9 |
|
125 |
200 |
15.6 |
15.6 |
22.0 |
|
150 |
220 |
20.0 |
20.0 |
34.5 |
|
200 |
260 |
31.0 |
30.5 |
57.0 |
|
250 |
350 |
50.0 |
49.5 |
81.0 |
|
300 |
400 |
70.0 |
70.0 |
113.0 |
|
350 |
450 |
90.0 |
96.0 |
149.0 |
|
400 |
500 |
116.0 |
127.0 |
184.0 |
|
450 |
550 |
147.0 |
163.0 |
235.0 |
|
500 |
600 |
181.0 |
211.0 |
353.0 |
|
600 |
700 |
272.0 |
325.0 |
- |
|
700 |
800 |
386.0 |
416.0 |
- |
|
800 |
900 |
533.0 |
572.0 |
- |
|
900 |
1000 |
698.0 |
745.0 |
- |
|
1000 |
1100 |
907.0 |
990.0 |
- |
|
1100 |
1200 |
1164.0 |
1234.0 |
- |
|
1200 |
1300 |
1452.0 |
1562.0 |
- |
|
1400 |
1350 |
1948.0 |
2062.0 |
- |
|
1500 |
1400 |
2273.0 |
2449.0 |
- |
|
1600 |
1450 |
2663.0 |
2841.0 |
- |
|
1800 |
1500 |
3348.0 |
3572.0 |
- |
Hot Tags: double flanged 90° bend, China double flanged 90° bend suppliers, manufacturers, Ductile Iron Double Flange Duckfoot Bend Elbow, DI Loosing Flange Fittings, DI Flange Pipes and Fittings, DI Flange Fittings, Flanged Ductile Iron Fittings











