Double Flanged 22.5° Bend

Double Flanged 22.5° Bend

A double flanged 22.5° bend—let's be honest, sitting there on the whole pipeline, it barely registers. But it's exactly these unassuming fittings that end up giving people grief during system commissioning...
Send Inquiry
Add To Inquiry
Description

Tianyi Suns Pipe&Fittings Co., Ltd. is one of the most reliable manufacturers and suppliers of double flanged 22.5° bend in China. We have world-leading production equipment and strong manufacturing capabilities. Please rest assured to buy durable double flanged 22.5° bend for sale here from our factory. Quality products and reasonable price are available.

 

Material

Ductile iron

Standard

EN545, EN598, ISO2531, ANSI/AWWA, etc

Size

DN50-DN2600mm

Color

Blue,Black,Red Ect.

Joint Type

Flange type

Pressure

PN10/PN16/PN25/PN40

OEM

Acceptable

Fitting Types

Socket bend, Flanged bend, Socket and Flanged Tee, Flanged socket, Socket taper, blank flanges, as well as Flanged adaptor,coupling, dismantling joints, Fitting for PVC pipes and Other pipeline accessories

Surface treatment

Fusion bonded epoxy coating

Cement lining inside and zinc and bitumen coating outside

Zinc+bitumen inside and outside

According to customers' requirements

Inspection

Foundry in-house: Third party inspection available upon request

Application

Stormwater systems
Wastewater systems
Irrigation systems

Advantage

We can make various high quality ductile iron fittings according to customer's requests.

Package

Standard wooden pallets or wooden cases

 

A double flanged 22.5° bend-let's be honest, sitting there on the whole pipeline, it barely registers. But it's exactly these unassuming fittings that end up giving people grief during system commissioning. TIANYISUNS has been making bends like this for years, and we've slowly landed on a simple truth: whether the angle's chosen right matters more to site progress than whether the bend itself is well made.

 

Let's talk angle first. 22.5° is a tricky number-it's not like 45°, where one turn is a big sweep, and it's not like 11.25°, where you can barely see the deflection. Where a pipeline needs a gentle course correction-say a long transmission main steering around an obstacle, or a plant network making a small directional tweak-the 22.5° bend is often the "just right" pick. But here's the thing: plenty of angles marked on design drawings just don't match the actual terrain once you're on site. And if you insist on forcing a 45° bend to make it work, the pipeline stress concentrates at both ends of the bend, and the flanged connections become a leak risk. Our advice is plain-set the angle after site layout, and if that means waiting a couple extra days for a custom build, so be it. Better than letting a mismatched angle eat up the flexibility of the whole pipeline run.

 

Flanged connections deserve their own chat. The flange faces on both ends of a double flanged bend are its rigid nodes-if the two pipe ends aren't aligned well during installation and you muscle the bolts tight, the bend body and flange neck pick up extra bending moment. We've seen a case-a project rushing to hit schedule, the bend went in and the pressure test came back fine, but half a year into operation the flange face started leaking. Pulled it apart and there it was: the gasket had been squeezed off-center by uneven clamping force. TIANYISUNS checks flange face flatness before every bend ships, but the bolt tightening sequence on site matters just as much-symmetrical, in stages, even force. That old rule beats any factory inspection, hands down.

 

On materials and coatings-body's ductile iron GGG50 or GGG40, lining in cement mortar or epoxy coating depending on the media, external coating in bitumen paint or epoxy spray. DN100 to DN1200 is the standard stock range, PN10 and PN16 cover most service conditions, and flange drilling follows ISO2531 or EN1092-2, so it lines up with mainstream network standards. Those are the on-paper specs-clients have seen enough of those to know them by heart.

 

What we really want to say is something else: a bend is a stress concentration point in the pipeline, and ten extra minutes confirming the angle and connection method at the selection stage beats adding expansion joints or rerouting the line after the fact-every single time.

 

NOMINAL
DIAMETER
DN

L

Mass(kgs)

PN10

PN16

PN25

80
100
125
150
200
250
300
350
400
450

500

600
700
800
900
1000
1100
1200
1400
1500
1600
1800
2000
2100
2200
2400
2600

130
140
150
160
180
350
400
298
324
349

375

426
478
529
581
632
683
735
835
886
940
480
520
540
560
600
640

9.4
11.5
14.7
18.7
27.9
55.9
78.8
77.3
96.7
122.0

146.0

215.2
299.4
408.4
525.6
677.0
877.0
1053.1
1497.2
1838.0
2119.2
1548.8
1966.8
2371.0
2484.8
3023.2
3645.6

9.4
11.5
14.7
18.7
27.4
55.2
77.5
83.6
108.4
138.0

176.6

267.8
329.2
447.0
577.2
760.0
947.0
1182.6
1632.8
2014.0
2323.6
1801.0
2272.4
2700.0
2818.8
3427.8
4116.4

9.4
12.5
15.9
19.7
31.6
62.8
89.0
99.9
131.0
160.0
199.8
296.6

 

Hot Tags: double flanged 22.5° bend, China double flanged 22.5° bend suppliers, manufacturers, DI Loosing Flange Fittings, DI Flange Pipes and Fittings, DI Flange Fittings, Ductile Iron Double Flange Duckfoot Bend Elbow, Flanged Ductile Iron Fittings

Send Inquiry

(0/10)

clearall