Tianyi Suns Pipe&Fittings Co., Ltd. is one of the most reliable manufacturers and suppliers of quick adaptor for pvc in China. We have world-leading production equipment and strong manufacturing capabilities. Please rest assured to buy durable quick adaptor for pvc for sale here from our factory. Quality products and reasonable price are available.
Quick Adaptor for PVC
Quick Adaptors are designed for use on air, water, sewer and gas pipelines. The adaptors are for joiniting with PVC or PE pipes. Quick Adaptors can be manufactured to special flange drilling such as BS4504 PN10,16,25, 40, BS10 Table D,E and F or ANSI flange drilling.
Quick adaptor is suitabe for PVC/PE pipe .It has a gasket and a restained brass ring .
When you put the pipe into the quick adaptor body , the brass ring will fasten the pipeto avoid the pipe out of the adaptor .
The body is made by ductile iron material.
The gasket is EPDM material for drinkable water or NBR material for oil/industrial pipe line.
The surface with fusion bond epoxy or polyesrter coating which is suitable for drinkable water .
|
No |
Reference |
Material |
Standard |
|
1 |
Body |
Ductile iron |
EN1563 |
|
2 |
Ring |
Brass |
|
|
3 |
Rubber |
EPDM/NBR |
EN681/EN682 |
Quick Adaptor for PVC
|
No |
DN |
Pipe OD |
PN |
L |
D |
Weight |
| mm | mm | kg | ||||
|
1 |
50 |
63 |
10/16 |
55 |
183 |
2.40 |
|
2 |
60/65 |
63 |
10/16 |
58 |
183 |
2.70 |
|
3 |
60/65 |
75 |
10/16 |
58 |
183 |
2.80 |
|
4 |
80 |
90 |
10/16 |
60 |
200 |
3.60 |
|
5 |
100 |
110 |
10/16 |
68 |
220 |
3.80 |
|
6 |
125 |
125 |
10/16 |
70 |
250 |
4.90 |
|
7 |
125 |
140 |
10/16 |
75 |
250 |
5.00 |
|
8 |
150 |
160 |
10/16 |
80 |
285 |
6.20 |
|
9 |
200 |
200 |
10/16 |
93 |
340 |
9.60 |
|
10 |
200 |
225 |
10/16 |
93 |
340 |
10.00 |
|
11 |
250 |
250 |
10/16 |
95 |
400 |
11.50 |
|
12 |
300 |
315 |
10/16 |
100 |
455 |
13.80 |
|
13 |
400 |
400 |
10/16 |
100 |
580 |
25.00 |
Standard: ISO2531,EN545
Pressure: PN10/PN16
Body material: Ductile iron with FBE ( fusion bonded epoxy) coating or Epoxy painting; Gaskets are NBR or EPDM;
Bolts and Nuts: Carbon steel with galvanized zinc plated G4.8/G8.8, or SS304/SS316.
Package: Wooden cases and protection layer.
Application: Quick adaptor is used for connecting PVC pipe.
In PVC piping systems, going from PVC pipe to flanged equipment traditionally means either solvent-welding a PVC flange stub or using a threaded adapter. The first one lives or dies on how well the glue work was done. The second one gets boxed in by diameter and pressure rating. TIANYISUNS' quick adaptor for PVC takes a different route, and it's a pretty direct one: ductile iron body, rubber sealing ring, brass locking ring - push the pipe in, tighten the bolts, and the flange end connects straight to the equipment.
The structural logic here really isn't complicated. The pipe goes into the adaptor body. When you tighten the bolts, that internal brass ring gets compressed and bites into the PVC pipe's outer wall - so the pipe doesn't get pulled out. Sealing comes from an EPDM or NBR rubber ring. EPDM is the go-to for potable water applications, NBR handles gas or other media. The body is ductile iron GGG50 with internal and external epoxy coating, typically 250 microns or thicker. There's a very down-to-earth reason for using ductile iron as the body: PVC pipe itself has limited rigidity. If the adaptor body were plastic too, then under large diameter and high pressure, the bolt preload at the flange end could easily deform the adaptor - and the sealing face would fail right along with it. A cast iron body holds up to that force, and the flange connection stays solid.
Diameter coverage runs from DN50 to DN400. PN10 and PN16 are the standard pressure ratings. Flange drilling can be made to EN1092, ISO2531, BS4504, or ANSI standards. Put simply, customers don't have to rework the selection logic for their entire pipeline just to match one specific flange standard. The brass locking ring is optional - you bring it in for applications that need pull-out resistance. This small component solves exactly one question: "will the pipe get pushed out by water pressure?" At pump discharges and downstream of valves, where pressure fluctuates a lot, the difference between having it and not having it is pretty obvious.
One thing that gets overlooked during selection: the actual outside diameter tolerance of the PVC pipe. The brass ring on a quick adaptor grips the pipe by compression. If the pipe's OD runs small, or the ovality is out of spec, the gripping force drops off. TIANYISUNS controls the adaptor body's socket dimensions tightly at the factory - but the condition of that PVC pipe on site is something the customer controls. So our advice is pretty direct: measure the pipe's actual OD before installation. Especially for large-diameter PVC pipe - the tolerance band is wider than you'd think. Measuring first beats installing it, finding a leak during pressure testing, and having to tear the whole thing apart.
TIANYISUNS has been making piping components for years. Quick adaptors aren't the highest technical barrier category out there, but they belong to that group of products where "install it right and nobody mentions it, install it wrong and it leaks every single day." The transition between PVC pipe and flanged equipment shouldn't be the weakest link in the whole pipeline. If you've got a project connecting PVC pipe to flanged equipment, send us - we'll help you get the configuration straight.
Hot Tags: quick adaptor for pvc, China quick adaptor for pvc suppliers, manufacturers, Flange Adaptor, Quick Adaptor for PVC, Quick Adaptor for PE











